Aluminum grip pliers are made of lightweight aluminum for professional strength. Aluminum grip straight tongs achieve the same durability and ease of use as all RIDGID heavy-duty tongs.

The jaws of the wire cutters with aluminum handle, the jaw of the wire cutters with tooth shape, the jaw of the wire cutters and the jaw of the bolt and nut are assembled on both sides of the front of the middle shaft of the pliers. There is a groove at the back of the central shaft along one side of the closed Central Line. The closed Central Line along the plane of the clamp body is provided with a wound pliers mouth and a skinned pliers mouth. The winding jaw by 2, 3 two Φ Φ hole. It can clamp Φ 1.5 ~ Φ 4 lines, the steel core wire bonding jumper clamp wire coiling. The scalping jaw is Φ 1, 2, 3 blade hole Φ Φ, constitute and milling groove, it can pick off Φ 0.5 ~ 4 Φ fine silk, the insulation of the wiring head skin. The safety handle sleeve is an insulating handle sleeve with anti-dropping ring on the handle of the pliers, which can effectively prevent the pliers from dropping in the work at high altitude.

For materials with different thickness and hardness, diagonal pliers with appropriate size should be selected. When cutting wires or component pins with diagonal tongs, the wire head should be turned downward to prevent the operator's eyes or other people from being hurt. Common wire cutters shall not be used to cut iron wire or other metal objects to avoid damage to the device port. The wires over 1.6mm shall not be cut with diagonal cutters.