Wire cutters are used to cut wire tools, the following to introduce the use of wire cutters, wire cutters how to use good results? Note for use of wire cutters.

How to use wire cutters

1, before the use of electrical wire pliers, must check the insulation handle insulation is good, if the insulation damage.

2. Pay attention to the safe distance between the metal part of the clamp head and the charged body when working with electricity.

3. When cutting live wire with electrician's wire cutters, do not cut live wire and zero wire at the same time with the blade to avoid short-circuit fault.

The pliers of steel wire pliers produced by the manufacturer of pipe pliers should be made according to their ability and should not be used over load. Avoid by all means is not in the case of cut continuously twist pliers, easy to collapse teeth and damage of steel wire or iron wire or copper wire, as long as the claws can leave a bite, then use pliers mouth before the tooth clamping wire, gently up or down a wire, can break off the broken wire, not only save Labour, and no damage to pliers, can effectively extend the service life. In addition, the wire pliers insulation and non-insulation, in the live operation should pay attention to distinguish, so as not to be strong electric injury!