Cable cutter is a special cutting cable cutting pliers, two blade staggered, can open and close. Cable scissors belong to large scissors, using the "lever principle" and "pressure and area are inversely proportional" design. In order to strengthen the strength and convenience of cable shears, ratchet cable shears are developed from the traditional manual cable shears.

Method of use

Accurately grasp how to use the cable shears, the use of cable shears will be an ideal temperature processing range. The processing temperature of plastics should be controlled so that it is close to the range of this temperature.

First of all, when it comes to the feeding section, there will be some friction. Of course, this kind of plastic is not very well heated, and the melting is not very uniform, which will easily lead to the inner wall of the plastic bucket and the surface of the screw to have greater wear.

The speed of the cable shearing should be adjusted moderately, because some plastics are added with fortifier, such as glass fiber minerals or other fillers. These materials tend to have a lot more friction with metal than with melted plastic, so pay attention to the speed when using cable shears. This will greatly improve the cable supervision work efficiency.

In addition, it will strengthen and produce more shredded fibers. The shredded fibers contain sharp ends, which will greatly increase the wear capacity and reduce the scraping effect after the mineral surface slides at a high speed. So the speed should not be set too high.