1.The plastic crusher should be placed in a ventilation position to ensure that the working heat of the motor is dissipated and extend its life.

2.The bearings should be regularly filled with lubricating oil to ensure the lubricity between the bearings.

3.Check the cutter screws regularly. After using the new plastic crusher for 1 hour, tighten the screws of the moving knife and fixed knife with the tool to strengthen the fixation between the blade and the knife holder.

4.In order to ensure the sharpness of the cutting edge of the tool, the tool should be checked frequently to ensure its sharpness and reduce unnecessary damage to other components caused by the bluntness of the blade.

5.When changing the cutter, the gap between the moving knife and the fixed knife: 0.8MM crusher above 20HP is better, 0.5MM crusher below 20HP is better. The thinner the recycled material, the larger the gap can be adjusted.

6. Before the second startup, the remaining debris in the machine room should be removed to reduce the starting resistance. The inertia cover and the pulley cover should be opened regularly to remove the ash outlet under the flange. Shaft bearings.

7.The machine should be well grounded.

8. Regularly check whether the belt of the plastic crusher is loose and tighten it in time.