1. The injection device and the mold clamping device are on the same vertical center line, and the mold is opened and closed in the vertical direction. Its floor area is only about half that of a horizontal machine. Therefore, it is about twice as productive when converted to floor space.
2, Easy to achieve insert molding. Because the mold surface is facing up, inserts are easily positioned. If the lower plate is fixed and the upper plate is movable, the combination of the belt conveyor and the robot arm can easily realize fully automatic insert molding.
3. The weight of the mold is supported by the horizontal template for vertical opening and closing operations, and the phenomenon that the template cannot open and close due to the gravity of the mold caused by the mold gravity does not occur. Conducive to maintaining the accuracy of machinery and molds.
4. Each plastic part cavity can be taken out by a simple manipulator, which is conducive to precision molding.
5. The surroundings of general mold clamping devices are open, and it is easy to configure various types of automation devices, which is suitable for the automatic molding of complex and delicate products.
6. The pull-belt conveying device is easy to realize the string installation through the middle of the mold, which is convenient for the automatic production of molding.
7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.
8. Equipped with rotating table, moving table and inclined table, etc., it is easy to realize insert molding and in-mold combination molding.
9. For small batch trial production, the mold structure is simple and low cost, and easy to unload.
10. Withstands the test of many earthquakes, the vertical machine has better seismic resistance than the horizontal machine because of its low center of gravity.