Fiber handle wire cutters can cut thick diameter wire, which is one of the indispensable hand tools for infrastructure projects, telecommunication wire laying projects and factories and enterprises to cut metal wire. It can be briskly cut in the hardness of HRC30 below the diameter of the specified range of various metal products. The structure is composed of a clamp head part, a clamp handle, a connecting arm and a adjusting screw. It can be divided into tubular handle type and malleable cast iron handle type. Specifications are: 300mm, 450mm, 600mm, 750mm, 900mm, 1050mm and so on.
Appearance quality inspection: there should be no cracks, harmful scars, burrs, rust and other defects on the external surface of wire cutters; Where the surface treatment of parts, color should be uniform, no spots, pitting and other defects; For the painted parts, the paint layer shall be uniform and meticulous, missing, bubble, peeling layer and flow mark shall not exceed 3 places, and the area of each place shall not be more than 6mm2.
Hardness test: the hardness value of the cutting edge of wire cutters is 53-60hrc; The hardness values of the middle and tail holes are 30-45hrc. The hardness values of bolts, clamping plates and central shaft are 33-40hrc.
Roughness test: roughness Ra value of the cutter blade cant be greater than 1.6 m; The roughness Ra value of the second plane of the blade is not greater than 3.2 m; Roughness Ra value of the remaining cutting parts of the blade is not greater than 6.3 m.
Performance test: the assembly of wire cutters should be flexible, not too tight and loose. The shearing range, loading, life test and shearing test of wire cutters shall conform to the provisions of table 6-10-91.