1. Classified by plasticizing method
First, the plunger injection molding machine pushes the molten plastic in the barrel forward through the reciprocating movement of the plunger in the barrel, and injects the mold through the nozzle through the shunt shuttle. Its plasticization mainly depends on the heat provided by the heater outside the barrel. Due to the poor thermal conductivity of plastic, the plasticity of the inner and outer layers of the material in the barrel is not uniform. Therefore, the plunger injection molding machine should not be used to mold plastic parts screw injection molding machines with poor fluidity, strong heat sensitivity, and excessive injection volume. Instead of a flat push plunger with a rotating screw in the barrel
The melt plasticizing and injection molding of the material in the barrel is completed by the screw. The screw can rotate and move back and forth in the barrel. The surface can play the functions of feeding, compacting, plasticizing and transmitting pressure.
2. Classification by appearance characteristics
The vertical injection molding machine has a mold clamping device and an axis of the injection device arranged vertically in a line.
(The injection volume is generally less than 60 cm3)
For horizontal injection molding, the axis of the mold clamping device and the injection device is aligned horizontally.
(Injection volume 60-60,000 cm3)
The angle-clamping device of the angle injection molding machine and the axis of the injection device are perpendicular to each other.
Multi-mold injection-clamping device adopts turntable structure
3. Classified by processing capacity
Micro injection molding machine, small injection molding machine, medium injection molding machine, large injection molding machine and super large injection molding machine
4. Classified by clamping mode
Elbow injection molding machine (hydraulic-mechanical), full hydraulic injection molding machine, all electric injection molding
Machine, electro-hydraulic compound injection machine
5. According to the change of material heating
Thermoplastic injection molding machine and thermoset injection molding machine.
6. Classification by operation method
Manual injection molding machine, semi-automatic injection molding machine and fully automatic injection molding machine
7. Classified by purpose
Multipurpose injection molding machine and special injection molding machine